Guide to choosing a door frame5 min read
Door frames: which type and which size for your wall
Rebated, flush, reverse, concealed HIDE or steel frame: how to choose the type and the size by the greatest wall thickness. Size table of makers and iDvere.

This text was machine-translated from Slovak and is awaiting review by a native speaker.
Types of door frames
Rebated
The leaf overlaps the frame; the frame has an architrave.
With us: in stock and made to order.
More about this type
Sizes by manufacturerThe edge of the door leaf has a lip (the rebate) that overlaps the frame. The door leaf is not flush with the frame. The frame is an adjustable lining frame with 60 or 80 mm architraves.
Flush
The leaf is flush with the frame; the hinges are concealed.
With us: Altamura 1 in stock, other models made to order.
More about this type
Sizes by manufacturerThe edge of the door leaf forms one continuous surface, and the door leaf sits flush with the frame on the hinge side. The Erkado frame has two concealed hinges that cannot be seen when the door is closed.
Reverse
Inverted rebate — a uniform look even when the doors open in different directions.
With us: not online yet.
More about this type
Sizes by manufacturerA door with an inverted rebate. It helps keep a uniform look throughout the interior, even when the doors open in different directions. Erkado supplies it with an 8 cm angle piece (architrave) and two concealed hinges, Invado ORS13 with two hinges for walls of 75–359 mm.
Concealed HIDE
Aluminium frame; the door leaf has a primer coat for painting.
With us: HIDE 1.1 in stock, with a two-hinge frame.
More about this type
An aluminium frame, flush or reverse, with two or three hinges. The door leaf is supplied with a primer coat for painting, the frame in raw aluminium for painting, or lacquered.
More about this type
For EXTREME RC3 security doors: a steel frame with a 150 mm profile in stock, or with a 100 mm profile made to order, supplied as a set with a 120 mm stainless steel threshold.
iDvere stock doors are rebated only — flush doors cannot be made.
Top-down diagram of the opening edge at the hinges. Not a manufacturer’s drawing.
What to measure
Frame size by the greatest wall thickness
An adjustable lining frame can be adjusted. Each size covers a range of wall thickness, from–to, stated by the manufacturer. For the frame to cover the wall everywhere, you choose the size by the greatest measured thickness. Measure the wall in three places, including plaster and tiles — the frame has to fit the finished wall.
- Measure the wall thickness in the opening at the top, in the middle and at the bottom.
- Measure the finished wall — with plaster, tiles and adhesive on both sides.
- Write down the greatest value. The frame size is chosen by it.
We are here to help
Don’t know the opening size?Measuring guide →Already decided?Door configurator →Would you rather call? 0907 085 086 or info@idvere.sk.
Frame sizes by manufacturer
The letter and the range in mm are stated by the manufacturer. “In stock” and “made to order” are the frame price bands in our price list — within a band, the set price is the same.
Erkado
RebatedNastaviteľná zárubňa – poldrážkové krídla
Online with us: in stock A–E, F–K · made to order A0–E, F–K
- A065–80 mm
- A80–100 mm
- B100–120 mm
- C120–140 mm
- D140–160 mm
- E160–180 mm
- F180–200 mm
- G200–220 mm
- H220–240 mm
- I240–260 mm
- J260–280 mm
- K280–300 mm
- 300–340 mm
- 340–360 mm
- 360–380 mm
- 380–400 mm
- 400–420 mm
FlushNastaviteľná zárubňa – bezpoldrážkové krídla
Online with us: in stock A–F, G–L · made to order A–F, G–L
- A80–95 mm
- B95–115 mm
- C115–135 mm
- D135–155 mm
- E155–175 mm
- F175–195 mm
- G195–215 mm
- H215–235 mm
- I235–255 mm
- J255–275 mm
- K275–295 mm
- L295–315 mm
- 315–355 mm
- 355–375 mm
- 375–395 mm
- 395–415 mm
ReverseReverzná nastaviteľná zárubňa
Online with us: on request only
- 75–95 mm
- 95–115 mm
- 115–135 mm
- 135–155 mm
- 155–175 mm
- 175–195 mm
- 195–215 mm
- 215–235 mm
- 235–255 mm
- 255–295 mm
- 295–315 mm
- 315–335 mm
- 335–355 mm
we will verify the sizes before ordering
iDvere
we do not sell these doors online yet
RebatedNastaviteľná zárubňa – falcová (skladové dvere iDvere)
- 80–100 mm
- 100–140 mm
- 140–180 mm
- 180–220 mm
- 220–260 mm
- 260–300 mm
Invado
RebatedORS1 / ORS8 – nastaviteľná zárubňa pre falcové krídla
Online with us: in stock A–E, F–K · made to order A–E, F–K
- A75–94 mm
- B95–114 mm
- C120–139 mm
- D140–159 mm
- E160–179 mm
- F180–199 mm
- G200–219 mm
- H220–239 mm
- I240–259 mm
- J260–279 mm
- K280–299 mm
- L300–319 mm
- M320–339 mm
- N340–359 mm
- O360–379 mm
- P380–399 mm
- Q400–419 mm
- R420–439 mm
- S440–459 mm
- T460–479 mm
- U480–499 mm
FlushORS7 / ORS10 – nastaviteľná zárubňa pre bezfalcové krídla
Online with us: made to order A–E, F–K
- A75–94 mm
- B95–114 mm
- C120–139 mm
- D140–159 mm
- E160–179 mm
- F180–199 mm
- G200–219 mm
- H220–239 mm
- I240–259 mm
- J260–279 mm
- K280–299 mm
- L300–319 mm
- M320–339 mm
- N340–359 mm
- O360–379 mm
- P380–399 mm
- Q400–419 mm
- R420–439 mm
- S440–459 mm
- T460–479 mm
- U480–499 mm
ReverseORS13 – reverzná zárubňa
Online with us: on request only
- A75–94 mm
- B95–114 mm
- C120–139 mm
- D140–159 mm
- E160–179 mm
- F180–199 mm
- G200–219 mm
- H220–239 mm
- I240–259 mm
- J260–279 mm
- K280–299 mm
- L300–319 mm
- M320–339 mm
- N340–359 mm
Porta
RebatedPORTA SYSTEM (aj GK/GLASS, 90°)
Online with us: in stock A–E, F–K · made to order A–E, F–K
- A75–95 mm
- B95–115 mm
- C120–140 mm
- D140–160 mm
- E160–180 mm
- F180–200 mm
- G200–220 mm
- H220–240 mm
- I240–260 mm
- J260–280 mm
- K280–300 mm
- L300–320 mm
- M320–340 mm
- N340–360 mm
RebatedPORTA SYSTEM HYDRO PROTECT
Online with us: on request only
- 80–120 mm
- 120–160 mm
- 160–200 mm
- 200–240 mm
- 240–280 mm
- 280–320 mm
- 320–360 mm
RebatedPORTA SYSTEM s opačnou polodrážkou
Online with us: on request only
- B95–115 mm
- C120–140 mm
- D140–160 mm
- E160–180 mm
- F180–200 mm
- G200–220 mm
- H220–240 mm
- I240–260 mm
- J260–280 mm
- K280–300 mm
FlushPORTA SYSTEM ELEGANCE (aj 90°)
Online with us: made to order B–E, F–K
- A75–95 mm
- B95–115 mm
- C120–140 mm
- D140–160 mm
- E160–180 mm
- F180–200 mm
- G200–220 mm
- H220–240 mm
- I240–260 mm
- J260–280 mm
- K280–300 mm
- L300–320 mm
- M320–340 mm
- N340–360 mm
FlushPORTA SYSTEM ELEGANCE HYDRO PROTECT
Online with us: on request only
- 95–135 mm
- 135–175 mm
- 175–215 mm
- 215–255 mm
- 255–295 mm
- 295–335 mm
- 335–375 mm
ReversePORTA SYSTEM HYDRO PROTECT – reverzné prevedenie
Online with us: on request only
- 86–126 mm
- 126–166 mm
- 166–206 mm
- 206–246 mm
- 246–286 mm
- 286–326 mm
SteelOceľová zárubňa EXTREME RC3 – šírka profilu
Online with us: made to order extension 101–150, extension 151–270, extension 271–390
- 101–150 mm
- 151–270 mm
- 271–390 mm
we will verify the sizes before ordering
Things to watch out for
A margin at the upper limit of a size
When the greatest wall thickness is up to 2 mm below the upper limit of a size (for example 98–100 mm for the 80–100 mm size), we recommend a frame one size larger. On an older or uneven wall, the smaller one might not fit. If the larger size belongs to a higher price band (for example 178–180 mm → F), the configurator also shows the price difference. On a perfectly straight wall in a new build, we take the size exactly as measured — that is why the configurator and the measuring guide ask what the wall is like. The manufacturer states a frame tolerance of ±3 mm.The boundary between two sizes
In their tables, Erkado, Porta and iDvere share end values between sizes, for example 160–180 and 180–200 mm. Invado’s ranges do not overlap — 180 mm is size F at Invado.A gap in the table
Invado has no size for 115–119 mm, and Porta none for 116–119 mm, so with a wall just below this gap there is no room to add a margin. With such a wall, contact us before you order.The wall is not finished yet
If the wall is still to be plastered or tiled, enter the wall thickness now together with the planned plaster, tiles and tile adhesive on both sides. We choose the frame by the total, and you order it bindingly to that size. Tilers, however, often use more adhesive than planned (15–17 mm instead of 10–11 mm) — the safest option is to measure the finished wall.Cornice and pilasters
At Erkado, a cornice + pilasters set reduces the frame range by 3 mm on one side or by 6 mm on both sides. In that case, add 3 or 6 mm to the wall thickness.A thin wall
The Erkado rebated frame made to order also covers 65–80 mm, but the tongue of the angle piece has to be shortened. Invado flush frame for a 75–85 mm wall: size A, with the angle profile shortened.A thick wall
The Erkado rebated frame above 340 mm is made of two parts, Invado from 360 mm of two joined parts. We cannot price such a frame online — write to us.
What the set price includes
- Door leaf and frame in the size for your wall, from the same manufacturer. The set price changes with the frame price band (for example A–E or F–K) — the configurator shows the exact price once you enter the wall thickness.
- Lock. For in-stock doors, the price includes a WC lock (bathroom privacy lock) for the 60 cm width and a BB lock (standard warded key) for 70–90 cm; changing the lock costs a surcharge. For made-to-order doors, the price includes a BB, WC or PZ lock (euro cylinder), as you choose.
- Architraves. In-stock Erkado sets have 80 mm architraves, Porta CPL 1.1 has 60 mm, Porta Decor P and Verte Home G.4 have 80 mm.
- The handle is not included. You choose it in the door configurator or in our range of handles.
Door frame on its own
We do not sell a frame without a door leaf online yet, for example for a door you already have. Send us the frame type, the door leaf width and the greatest wall thickness — we will prepare a quotation. If you are keeping an old steel frame, send us its clear width and height and a photo. We will check with the manufacturer whether a new door leaf fits it before you order.
Doors and frames by series
Erkado
Invado
Porta
Frequently asked questions
Which door frame do I need for the door I have chosen?
The frame must match the door leaf: a rebated frame for a rebated door leaf, a flush frame for a flush door leaf, a HIDE frame for HIDE doors. The frame in the set is always from the same manufacturer as the door leaf. The configurator only offers frames that belong to the model.
My wall is 12 cm thick in one place and 13.5 cm in another. Which frame size do I need?
Go by the greatest measured value, i.e. 13.5 cm (135 mm). At Erkado, that is rebated frame C for walls of 120–140 mm. Enter 13.5 in the field above the table and you will see the size for each manufacturer.
Why does the same letter mean a different wall thickness at each manufacturer?
Each manufacturer has its own size table. For example, rebated frame C covers walls of 120–140 mm at Erkado and Porta, but 120–139 mm at Invado. So always enter the wall thickness, not the letter.
Is the handle included in the set price?
No. The set price includes the door leaf, the frame in the size for your wall, and the lock. You choose the handle separately in the configurator or in our range of handles.
Do you also sell a door frame on its own, without the door leaf?
Not online yet. We sell frames as a set with the door leaf. If you only need a frame, send us the type, the door leaf size and the wall thickness — we will prepare a quotation.
My wall is thicker than 30 cm. Is that possible?
Manufacturers also make frames for thicker walls: Erkado rebated frames up to 420 mm (above 340 mm made of two parts), Invado up to 499 mm (from 360 mm made of two joined parts). We do not have their prices online; the promotional price list ends at 300 mm. Write to us and we will check the price.